Seiten

▼

Montag, 10. Februar 2014

Ekahau Site Survey 7.0 review (part 1)



Ekauhau Site Survey 7.0 announced. Time for taking a first look at new release of my favorite site survey software. 

The new release introduces multi-adapter support for external wifi adapters. Up to 3 wifi adapters are supported to speed up the survey time. During a passive site survey the software can simultaneously scan both the 2,4 GHz band (first wifi card) and the 5 GHz band (second and third wifi card). With three adapters the U-NII channels could split into two halfs. The screenshot show the channel configuration dialog with 2 wifi adapters inserted (second Ekahau 300 NIC scans all 5 GHz channels in this case).

Channel configuration dialog

This speed up of one measurement period for all available channels up to two or three times. This improves user expirence and you can collect more measurement points making the survey data more detailed. In the past one measurement period takes around 4 seconds to scan all ETSI channels in both frequency bands. I checked the new feature during my last post-deployment site survey. Scanning was really fast: I walked around and could set one measurement point every 1-2 meters directly after clicking to mark the last point.

Two Ekahau NIC-300 NICs plugged into laptop.



Another new feature is an improved channel planner. This feature could be used during predictive site surveys for channel planning. In some cases very useful,  if  don't trust the automatic channel selection algorithms of the wireless controller/software and you wouldn't start from scratch with your own channel planning.


Channel planner tool

I tested the feature after I surveyed a customer deployment with some autonomous access points. The customer added new access points, but deployed it with his standard configuration template without changing the default channel 6. After the survey I selected all customer access points and startet the auto channel planner to tool. As result I've got my improved 2,4 GHz channels for all access points. You can see the result even in the visualisations and one the left side in the access point view. If you left-click on the channel in the ap view you could see even the planned channel and the during the site survey discovered channel. The only thing I missed was a feature to export the ap list with the planned channel. If you create a survey report with reporting tool, only the original access point channels are listet in the ap overview table.   

In the second part of the review I will take a look one the signal difference feature. This should be useable to compare surveyed areas to see how the network changed over the time.